Hardcore trimming :D

[Skull]

The fact is I really hate having plastic in my ****-pit, so I decided am gonna trim everithing I can. Here is what i have been doing this days:

First I started with the front side panels:















After seeng how it came out I have gone berserk, and started pulling everything apart:

Rear panels (we are talking saloon)

[Skull]

Check the detail out:





No it is not all, what about this?



Trimmed


And mounted!

[Skull]

What obout this middle ugly bitch panel?



sonuva....



Almost done...






Chech da detail out:



This is next... in a few days...

[NoNonsense]

that's awesome! Any details on material (kind of looks like suede or ultasuede in the pics). Did you have to scuff up the plastic to help the glue adhire?

[ottawa coupe]

very nice! i'm assuming that's alcantara or some sort of fuzzy fabric.

[SteveH]

Looks great...a very tidy job indeed

[ThatGUY]

That looks great. I have been wanting to do this for a long time. I would like to cover the top of the dash to reduce glair. Are you using ultra-sued or the real stuff?

Andrew

[Stick Insect]

That's a nice job, I did the same on a girlfriends Metro Turbo and it makes a big differnce to the appearance of the car.

I used spray adhesive which gives an even coating and is easy to apply.

David

[Skull]

that's awesome! Any details on material (kind of looks like suede or ultasuede in the pics). Did you have to scuff up the plastic to help the glue adhire?

I did nothing to the plastic, just laid glue on both plastic and cloth. The material is 100% poliester, but very cool at touch. It is best imitation of suede there is. And most importantly it is very thin, so you dont get spaces...

[Skull]

That looks great. I have been wanting to do this for a long time. I would like to cover the top of the dash to reduce glair. Are you using ultra-sued or the real stuff?

Andrew

Like said, it is a very good imitation, and what is important it is very thin. The dash job would too difficould for me, it needs a lot of sawing... ill skip it, but good luck!

[Fat Audi 80]

Very nice finish!

[Skull]

Tnx, i have done the shelf, but have to fix in the speakers, looks horrible wit the holes...

[Greg_S]

Very impressive. Are you doing the headlining as well

[Skull]

I will, i just have to figure out how to do the piece around the visors and the roof light. It will require sawing, and i am not really practical in that...

[Skull]

Am i going too far? nooo i love details









Too bad i have to use the flash, the cloth is really black-black.