m232.org

[prj]

Hello,

Due to lack of commercial viability of the platform I am in the process of documenting and open sourcing all of my knowledge about this ECU, while I still remember it.
The first step has been done, and the following has been released:
* Base files with LC/NLS, speed density code, high-speed data logging and more.
* ECU definitions
* DLL driver for automating checksumming
* DLL driver for fast datalogging of the ECU parameters
* Wiki with detailed information on ECU inner workings

Without further ado - head to http://m232.org - everything that is needed to tune is there.

NB! Please do not ask generic questions in this thread, find the correct discussion thread or make a new thread instead.

[rxl]

thanks but you will also tune s2 if they come to you?

[blux]

bookmarked the page. There is already a lot of info on there. by any change got a stock ADU file to compare with ABY?

[prj]

thanks but you will also tune s2 if they come to you?

I do, but I fit ecumaster emu (classic) on them these days. I have a huge amount of experience with mapping 2.2T of course, but there are very few of these cars left.
I work on much newer things these days.

bookmarked the page. There is already a lot of info on there. by any change got a stock ADU file to compare with ABY?

Completely irrelevant, why would you compare ABY to ADU when in my firmware a lot of critical code is written from scratch?
That and not all the binaries line up.

If you need to tune your car, just grab the toolchain, put it in the car, get a loggable wbo2 (zeitronix) and tune it. Who cares what the factory did 25 years ago?

[DeS]

Great, thanks Dmitri

[Jiri]

Many respect prj!!

[dr.strangelove]

I'm very excited to check out this site when I get home.

Thank you!

[SteveH]

Nice one

[rs2coupe]

Wow such an amazing gift to the forum!! Many gracious thanks...

[vwnut8392]

just seen a post about this, nice work dimitri. thank you for not taking your knowledge to the grave.

[Error404]

Thank you Dmitri

[piotr]

Good Man -Thank you

[GazzaG60]

hat off to you. you could easily just take that knowledge and docs to the grave.

[Henkjan]

Thanks for sharing!

[Greg_S]

Thanks for sharing Dmitri, looking forward to working my way through it all.