does anyone know what exactly happens when the processor crashes or is having trouble keeping up? what going on is when doing a full pull its like i hit the load limiter and hard fuel cut happens. the thing is i have the load limiter set to max and im nowhere near it. i noticed when this happens the lambda control seems to reset in a sense, normally when i lift throttle it goes back to targeting 14.7 but after this happens it seems to take the usual 20+ second till lambda control starts functioning. The other thing thats seemed to develop from this issue is that on WOT pulls the car hesitiates very bad. under normal driving its perfect. im thinking the hesitation is something ignition related but im not sure. i have 07K coils and NGK BKR7EIX plugs gapped to .026, this combo has never let me down before. i';ve been chasing this problem for a few weeks and im pretty puzzled. though timing was too aggressive so i made it almost as conservative as the knock timing map, added fuel to thinking it may have been a lean issue but that didnt fix it. i tried putting the stock coil dwell mapping back in because i realized the dwell table has been modified for modern coils and that did not work either. the strangest part is you cant see anything in the logs during this hesitiation issue. im puzzled and any help is appreciated, thanks guys.
Attached is a log. from a 1-2 pull on the highway. i cant see anything. wrong here.
Attached is a log. from a 1-2 pull on the highway. i cant see anything. wrong here.
Comment