I discovered these 2 maps in the damos for those who want to be able to add some timing during overboost.
The first one is ignition angle during overboost. This map is a 4x1 table that is an adder to the base timing table. By default it is set to 0.00 deg BTDC at 4000RPM and above.
The second map is also a 4x1 map that follows right after the ignition angle table. It is called( ZW Overboost Trim - MAIN Pass Counter), This one is the time in seconds the ignition angle is added to the map during overboost.
The first one is ignition angle during overboost. This map is a 4x1 table that is an adder to the base timing table. By default it is set to 0.00 deg BTDC at 4000RPM and above.
Code:
Size=4x1
Code:
Address=0x94DF
Code:
Coversion for cells=0.750000*X
Code:
RPM Axis=0x94DB - 4x1 - RPM
The second map is also a 4x1 map that follows right after the ignition angle table. It is called( ZW Overboost Trim - MAIN Pass Counter), This one is the time in seconds the ignition angle is added to the map during overboost.
Code:
Size=4x1
Code:
Address=0x94E9
Code:
Conversion for cells=0.100000*X
Code:
RPM Axis=0x94E5 - 4x1 - RPM
Comment