Anybody got a BTDT or know how to remove and change the bee sting aerial base from a Coupe pretty please? 
-
-
From below is best. :mischeif:
Or ask Sal for a demo
Kingdoms are run by Kings, Dictatorships are run by Dictators.
England must be a Country. :mischeif: -
I want to keep my roof lining thanksOriginally posted by BRYFrom below is best. :mischeif:
Or ask Sal for a demo
Comment
-
yes thanks, did it last week, but ive got an avant so i don't know if it's the same. i had to remove the rear courtesy light, unscrew the nut that holds the aerial in place and you can then remove the aerial.
Tim
1995 S2 Avant, ruby red - ** SOLD TO ROSS **
Golf Rallye G60 ** SOLD **
Golf MK2 Oaky with R32 engine
Audi A6 Avant 1.9 TDi 130
Golf MK2 8v Race carComment
-
I did this a short while back as I had a bit of a leak from there.
Easy as 1 2 3
Ready.
1. Pull out the light from one side first and then the other + pull to one side and remove the ariel lead.
2. Get a ratchet with long extension on and squeeze it around the nut.
3. Undo and remove.
Attatchment is the reversal but you will need someone to stand outside and hold the damn thing still while you tighten it up.
Whats up you got a leak or replacing it?Dark Grey Avant
RS2 FARB
Powerflex Front wishbone bushes
Alloy Subframe BushesComment
-
Cheers i couldn't see it the first time i was out before i post, seems my base is OEM as the seal that holds the wires up hadn't been broken and i couldn't see the nut.
I was replacing but just seen the the coax connection between the OEM and my replacement is different
Trip to Halfrauds to see if i can find something to adapt.Comment
-
I get really naff reception with my radio... are you guys experiencing this? .. im considering changing my ariel to a nice shark fin and re-placing naff parts... anyone done this... or know route of problem?
Comment
Comment