Quality Boot Install

[Greg_S]

I was gonna try do similar but build the amp into the side or the top of the sub box.

Greg

[horvathg]

I was gonna try do similar but build the amp into the side or the top of the sub box.

Greg

I'll show how my amp looks in the rear underside tool place. You need a long and narrow amp, though.

[Fat Audi 80]

I was gonna try do similar but build the amp into the side or the top of the sub box.

Greg

You can't get away with that when you have a 4 channel amp though!

[Greg_S]

good point, wasnt really sure how much clearance there is in there. Found a nice 6 channel amp that was quite slim. about 8 -10" wide by about 20-25" long

Greg

[Greg_S]

have you got any pics of how you made the sub box?

[Fat Audi 80]

No, Sienna (Vagsport) sold it to me!

However if you are desperate I can get it out the car and take pics of the back of it.

Basically, you build a rectangular sub box as normal. Next cut a flat sheet of MDF in the shape of a rough circle that would match the radius and curve of the spare wheel well. This is then screwed to the front of the rectangular box.(Like a tyre sidewall) Then a thin piece of plywood was fitted and curved to make the top and sides of the enclosure. (A bit like the tread area of a tyre.)

This then all wedges itself rather nicely in the spare wheel well....

Let me know if need those pictures.

Cheers,

Steve.

[Greg_S]

ah that dont sound too bad. would mind a few pics if thats ok?

Greg

[Fat Audi 80]

Will try to take some at the weekend and upload next week.

Cheers,

Steve.

[horvathg]

You can't get away with that when you have a 4 channel amp though!

Here is my Audison LR 605, five channel amp hidden in the rear undertray. Exactly passes there...together with the DLS capacitor. As would the Audison millenium 4 or 5.