DIY coilover kit for B4Q

[Ice]

Searched the forum and found nothing.
Idea is to make the kit based on adjustable Koni Sports. Everything else is still quite open. Options include parts from Ground Control or something from here. Has someone done something like this or even thought about it? What springrate and lenght to use etc. I read on Motorgeek that there might be a problem with the rears...?

I really care not to pay unjustified amounts of money to HR or KW.

[pastures16]

try this bloke might give you a rough idea

http://www.aufhaus.com/quattro/coilovers/index.htm

[Ice]

Got some useful info, thnx Pastures16.
Also the springrate around 300lb rear and 250lb front has been suggested. What about the springlenght? Something around 7"? What kind of a maximum drop can be expected? That on the earlier- given link is not much imo.

[WabTheKing]

cant find the orginal topic but this is how i did it

[WabTheKing]

cant find the drawing i did did anyone else save it?

i used 400lbs springs

[Ice]

10mm or D shape hole in Top Cap <- what the hell does this mean?

[volcano rs]

on yours its 10mm dont let all that confuse you .andwabthe king 400at the front or the back a bit hard are they not ?

[Ice]

This is the rearspring of my car... Cant figure out, if its doable, cause someone @ motorgeek mentioned it to be impossible?

[quattro]

Where would i get springs from for this, i am interested in converting this on to my car!

[Greg_S]

Ice, what model is that suspension from?

[pastures16]

must be an avant

[volcano rs]

its from 90 quattro

[WabTheKing]

i have h&r's on the back i only have coil overs on the front

[Ice]

Ice, what model is that suspension from?

It's 1992 B4 sedan, 2.3L quattro.
This one