RS2 rear shock

[CP951]

Hello,
Could someone please help. My questions:
1. Whats the torque setting for the upper and lower rear shock absorber attachment bolts (not the ones for the shock housing to body). Sorry i couldnt find any reference material.
2. Where is the camber and toe adjustment screws at the rear?
Many thanks.

[CP951]

Would someone also know the standard alignment specs front / rear for the RS2? Thanks.

[RS2.pt]

Would someone also know the standard alignment specs front / rear for the RS2? Thanks.

here it goes, with some notes that I took from rs2 mailing list.

Caster front:
Recom.value +2,10º
Max diffrence left/right +0,30º -0,30º

Camber front:
Recom.value -0,45º
Max diffrence left/right +0,30º -0,30º

Toe front:
Recom.value +0,07º
Max diffrence left/right +0,05º -0,05º
Toe total front +0,14º
Max diffrence left/right +0,10º -0,10º

Camber back:
Recom.value -0,40º
Max diffrence left/right +0,20º -0,20º

Toe back:
Recom.value +0,05º
Max diffrence left/right +0,05º -0,05º
Toe total back:
Recom.value +0,10º
Max diffrence left/right +0,10º -0,10º

better cornering, never done on mine so dont know if the the results are as stated " negative camber: a total of -2 degrees neutral in the back, if you want to get any mileage from the tyres you have, as obviously the inner side will wear out more during normal driving. But cornering is much improved"

[CP951]

Thanks very much. Very kind of you. Would you know the torque settings as well and where are the adjusters at the rear?
Thanks

[RS2.pt]

Thanks very much. Very kind of you. Would you know the torque settings as well and where are the adjusters at the rear?
Thanks

sorry, nop... if you find, please post it here to complete the list.