Ultimate track setup for S2

**Albert** · 13 February 2006, 21:04

Guy's thanks for answers.

**maRS2** · 14 February 2006, 22:01

Here is some intresting about castor and camber on our car's

http://www.motorgeek.com/phpBB2/viewtopic.php?t=8196

ok, so after going to the track and putting my car to use, i've been looking around a bit at what i can do to improve the front geometry on my car to make it handle like a more modern car (like the bmws who have handle and predictability down pat) yet still have the advantage of the awd. if...

I like the idea of moving front the subframe to get more castor

**Albert** · 25 February 2006, 09:06

Originally posted by zlobo

Ã–hlins i think is overkin an you wont get out more from then than a kw variant 3 and the kw variant 3 will be nearly 50% cheaper than Ã–hlins.

Zlobo can you provide me some links I coukd read about those KW ?

**Albert** · 25 February 2006, 09:44

Powerflex oferts also Front Outer Roll Bar Mount Upper and Front Outer Roll Bar Mount Lower.

Numbers 3 and 4 on the picture.

Is there an alternative form that from Superflex ? There are some extra products on their page but I can't figure out what to get. http://www.superflex.co.uk/SuperFlex...tro_Prices.pdf

I have got allready Aluminum Subframe Bushings x 8 from
http://www.034motorsport.com/product...roducts_id=344 Nice product for good price.

**zlobo** · 26 February 2006, 20:08

have a look , here Albert you can also get a variant 3 but thats expensive.. and hard to adust.. i havent got the time to adjust yet but hopfuly i will this year wit my new engine in.

i am also using top mounts from qrsport.. must say that they are exelent.

ant then i use powerflex in front and rear and to the front arb.. i am also planing to make a new arb to the front or by a rs2 one.

**Albert** · 26 February 2006, 21:14

Originally posted by zlobo

have a look , here Albert you can also get a variant 3 but thats expensive.. and hard to adust.. i havent got the time to adjust yet but hopfuly i will this year wit my new engine in.

In the link there is V2 only. Do you have the nuber of V3 ? how much is V3 ? where to buy it ?

404 Not Found

http://www.kw-suspension.com/en/30_Products/20_KW_Coilovers/30_Variant_3/index.php

Originally posted by zlobo

i am also using top mounts from qrsport.. must say that they are exelent.

ant then i use powerflex in front and rear and to the front arb.. i am also planing to make a new arb to the front or by a rs2 one.

Same setup

I have RS farb form a friend.

**zlobo** · 26 February 2006, 23:38

there is only v2 on their oder form, but they take special order for v3 you have to go to youre local dealer, and they ar going to ask. but i can think it wuld be ~5000â‚¬

The expirience i got from KW is that every thing takes long time special now durong winter and spring. The piro of making a sets goes to ex abt audi sport, bmw sport.

Ultimate track setup for S2

Comment

Comment

Comment

Comment

Comment

Comment

Comment