Wishbones & Wishbone bushes

[Error404]

yeah it seems a bit random, as i had the cast ones on my 2.8 CQ... i think they just chucked on whatever they had lying about by the sounds of it

[Acidburn]

That sounds like audi

@s2driveruk - tbh I have no idea whats under the back of mine as apart from fitting the backbox I ain't touched it.

[Error404]

will forged arms fit the rear? :mischeif:

[Acidburn]

I'll try confirm but iirc the wishbone's balljoint is different but you should be able to get hold of some reasonably easy.

[Error404]

yer ball joints are an easy swap... if they fit right

[Acidburn]

Front one's on an s2 are 3x bolts, rear ones only 2x and its shaped differently otherwise would be easier sourcing bits. If your after some i'm sure I could find some for ya

[volcano rs]

i had my pressed ones seam welded then powder coated if you look carefully

[Error404]

Yer Azman mentioned seam welding them - think i'm going to swap out my pressed ones and keep the forgies for powder coating with the subframe :mischeif:

[Acidburn]

I've got a spare pair of forged one's which I plan on fitting powerflex bushes to and then fitting to a spare subframe I want to get powdercoated.

Great minds think alike

[s2driveruk]

pretty sure the forged wont fit the rears. All were pressed rears with the 2 bolt balljoint IIRC

[volcano rs]

pretty sure the forged wont fit the rears. All were pressed rears with the 2 bolt balljoint IIRC

i've seen them done someone on this forum had a pic