Need family album help with part number

[A80Avant]

Hello,
i have this part number: 8A0 511 327 B
this is off the rubber mountings of my RS2 RARB.I searched the family album and found that the part number that it is supposed to be there is 8A0 511 327 E.
Im trying to figure out if this is a dropped part that was replaced by the 'E' part or it belongs to a different RARB which i cannot find.The 'B' part doesnt seem to be foundble in my ETKA maybe it is too new.

I know that the S2 RARB has 8D0 511 327 C as the rubber mounts so it is unlikely that has the 12.5mm RARB there.Im also trying to locate the RARB part number but i cannot seem to find it on there.where is it usually marked?

cheers
VAsilis

[A80Avant]

thanks for that jamo,didnt realise i shouldnt

but anyway i managed to find a way around it.It seems that 8a0511327B is replaced by 8d0511327C from the S2 avant.So i had the small rarb then!

[UrS4boy]

thanks for that jamo,didnt realise i shouldnt

but anyway i managed to find a way around it.It seems that 8a0511327B is replaced by 8d0511327C from the S2 avant.So i had the small rarb then!

If you look on illustration 501-20 it describes item 9 as the Stablizer, 16 mm.
PN 8A0 511 409 L.

[A80Avant]

yes i know that.it is just that my stabilizer had no part number on it as it had been erased due to time probably,so i couldnt find it on it to compare and understand which rarb i have.

all cleared now