I bought Audi Sport wishbone

[panzerwagen]

ME! ME! *Raising hand. Fronts please. I have tubulars out back.

All I need are fronts please....of course depending on price too. BTW 034 are trying to make tubulars too......some day.

[Rusty]

If you're custom making them for raod use then it figures to incorporate the existing lower ball joint into a custom design?

[Rusty]

Fronts will fit the avant and the rear is a more modern design anyway so doesn't really have the same issues as the older mcPherson strut.

[garym]

wishbones

these type of wishbones have been available for ages ,i have seen at least 2 different sorts, i myself offered t45 exact copys and had the ali slider remade with uniball joint but proved to expensive for road use, you must also consider that the outer joint fits to a tapered pin on the bottem of the works uprights which is not on std uprights ,make sure you understand how they work before buying some its not just the wishbone that gets changed ,

[Albert]

I will be not making rear for the avant. Sorry to difficult.

[Acidburn]

Terrybullwon front and rear
Anton front and rear
Acidburn front and rear (depending on price)

[Flat on my back]

.

Using a good tube and plate in the construction they will probably be close to 1/2-1/3 of the weight of the cast version...going by my engineering thumb...

[Rusty]

What lower balljoints would you use?

[Albert]

The biggest advantage of the new wishbones will be:
- they will be more stiff and give more rigidity
- they will enable to set negative camber

[HPmuirt]

I am interested, but can you give us a ball-park estimation on the price, based on the cost of making the first copy?

Also can you please weigh both the original and the copy so that we can compare against the cast and pressed S2 versions?

Cheers n

Si

[europeanme]

are they coupe specific??...if the price is right and fit an avant..yes please...

[4WheelDrifter]

Yes. Interested in copies. Depending on weight, or lack of it.

[mikeraz1]

Yes depending on price!!!

[Error404]

are they really that much lighter / stronger than the forged front wishbones?

I'd be interested in a pair of rears if the price is right

[quattro]

Front + rear if price is within reason!