URS4/S6 advant rear suspension problem

[diesel des]

Ok as title. I have a LOT of camber change. EG with car lifted i can grab the rear wheel and move it in and out. The play is at the hub where it bolts onto the camber adjuster/top arm. There is a big bolt that goes through the top arm and the hub. There looks to be a bush of some sort in there that is completely nackered. LOTS of movement.

What needs changed? Does this bush come seperate or do i need a arm? If so anyone got part numbers? Big job? Cheers,des.

[diesel des]

443505153B This might be the part number from a bit of net searchin?

[diesel des]

Arm is 443505352P and 443505351P no 1 on etka. This a common problem?

[merlin's S4]

I had exactly the same problem so bought 2 new control arms/adjusters. The bush comes complete with the new unit. Paul @ custom auto craft sells them... http://sites.internet.lu/folders/cus..._S6_S6PLUS.htm

[diesel des]

Ordered them from Quattro corner today. £60 odd each. What camber did you set yours too?

[martinjs]

I've been meaning to order some for mine for a couple of weeks now, and front track rods and front balljoint arms.
Do gsf do them?
My rear passenger wheel sits at an odd angle also Des.
Then i'll be taking it to this place http://www.wheels-inmotion.co.uk/
They really know their stuff apparently.

[jay-83]

Deleted

[merlin's S4]

Ordered them from Quattro corner today. £60 odd each. What camber did you set yours too?

Not sure exactly, it was all done to spec when I had it all aligned.

[diesel des]

I got most of those bits from GSF/Euro car parts.