Coupe rear springs

[kopsik]

Since I'm going to remove most of my rear axle I'm thinking of changing the rear springs also.

Are the S2 and CQ springs the same?

I'd like my cars rear to be a little bit higher and I read about front springs on the rear. Will that do the trick? What do I need to put front springs on the rear?

[Rusty]

Front and rear springs are near identical, rears are around 10m shorter although they are possible a touch stiffer.

[mcandmar]

S2 and CQ springs are different spring rates, S2 being the firmer of the two. From memory they also sit slightly lower. IMO ditch the CQ springs as they make the car feel like a boat.

[Rusty]

Yeah, S2 has the 'sports suspension' option.

I'm sure there are people with a spare set.

The other option I though of was rear S2 springs on the front to lower it a tad.

[kopsik]

Thanks. I'm gonna try S2 springs on all corners.

[geryS2]

their the same size but not the same load, i did put S2 springs on a 2.8 CQ.

But i think front srpings are stiffer due to engine weight, so yes, could try put the front springs at the back too.