Poly Bushes - Avant

[madpugger]

Does anyone know, do powerflex do the rear lower wishbone outer bush?

I called them and they 'said' they do them, but I don't see them listed so I wandered if anyone has fitted them?

Cheers
Mike

[Big Lee M]

I've got a full bush set to fit front and rear I'll get the part number when I get home tonight.

[Flat on my back]

.

You mean the large bush in the 's' shaped cast arm, then no.

[madpugger]

Yeah, where a ball joint would be on the front.

[Flat on my back]

Well...

there's a thing...search for threads by Skull (you'll need 2 dots over the 'u').

He's trying to get some PU ones made...

Or you talking about the smaller arm that comes off the cast arm? (sets the rear toe).

Balljoint...that's got me confuzed...we need a piccy.

[madpugger]

Ok, on the rear there is a lower wishbone, an upper wishbone and the hub carrier.

Lower wishbone has:

Front inner bush
Rear inner bush
Shock absorber mounting
Hub carrier mounting on the outer (This is the bush not listed as far as i can see - the bush is actually in the bottom of the hub carrier)

Upper wishbone:
Inner front and rear bushes (the same as each other)
Outer bush where the hub carrier is bolted to it (above the wheel)

Hub carrier:
This has one bush at the bottom, where it connects to the lower wishbone. (again, this is the bush I am after) It is the one that has the camber adjust bolt through it.
It also has the mounting for the ARB Drop Link.

[istoo]

totally OT

saw you parked up at the beach a few weeks ago... waved but thought it was rather pointless given you would have no idea who i was!
Spied a huge increase in S2's lately around the shire.

[madpugger]

You did? Oh i must have been stopped to eat a BK!

I haven't seen an S2 for aaaages!

[M_GORDON]

HI!

I have too a avant and I must change all pieces (I don´t change they).
I see 034 motorsport sell some of Powerflex to our cars, but they do sell all in one packet?

THX

[Big Lee M]

Sorry totally forgot about this,the part number for the rear lower arm bush from Powerflex is PFR3-206

Hope this helps

[S-Express]

Sorry totally forgot about this,the part number for the rear lower arm bush from Powerflex is PFR3-206

Hope this helps

Thats the rear lower arm rear bush, not the rear lower arm outer bush.
I've just totally rebushed my car and could not get poly's fpr the rear lower arm outer bsh, so had to use OE instead.

[lind4hl]

i am going to make my own bush in the hub. maybe i will do some more..

[Big Lee M]

Have anyone got a pic of the bush that we are on about here???

[lind4hl]

stolen from the s2forum gallery:

[Ducky]

I've just rebushed my car today and I was wondering about this lower bush too...guess I'll have to go OE for now. Does anyone know if there is a poly bush available for the rear tie rod (8A0501530C) that has a ball joint at one end?