one set for UrS and another for "family wagon".
Any interest in S4/S6 Delrin rear subframe bushes?
Collapse
X
-
Thanks for the update, i badly need to do these on the S4. Any words of wisdom on removing the subframe?
Thanks,
Mark.Leave a comment:
-
**UPDATE**
I finally got around to fitting the Delrin bushes last weekend and it wasn't anything like as bad a job as I was expecting.
I still need to get a 4 wheel allignment done but the bushes have already made a very noticable difference to the handling of my S4. The overall handling feels much more positive and precise. The back end finally feels like it's connected to the front and is actually helping the car around a corner rather than being dragged reluctantly by the front! I would imagine that this would be further enhanced should you choose the aluminium bushes. Also, I have not noticed any increase in road noise which I was pleasantly surprised at, although I have noticed a slight squeak from time to time but I have not yet confirmed that this is due to the bushes. It is not unusual for delrin or poly bushes to squeak but after contacting Bambridge he thinks that if the bushes are indeed the cause of the squeak then this can be cured by machining grooves into any subsequent batches and greasing around the bushes when fitting.
Overall I am delighted with not only the product but especially the service and help provided by Kev (Bambridge). I cannot praise him highly enough, so if you're interested in a set of these bushes, or any other custom bits, then give him a shout!!
Remember that neither OEM or standard aftermarket rear subframe bushes are available anywhere for the urS4/S6 or any other C4 quattro chassis, so if your's are shot like mine then these are currently your only option for replacement.
I will post some pics later and continue to post any further news about my prototype bushes!!Leave a comment:
-
Those bushes are almost certainly the Addict Motorsport bushes in the US. I tried to contact Addict Motorsport on a number of occasions over several months and didn't receive so much as a courtesy reply! I've also heard of enthusiasts in the US being unable to contact them. This is one of the reasons that I started this thread and now inside a short timeframe I have a very good looking product ready to test.I'd also be interested in a set of these.
This page is interesting/relevant.
http://www.phonecallsfromthedead.net...r/s6/S6p3.html
Watch this space!!!Leave a comment:
-
I'd also be interested in a set of these.
This page is interesting/relevant.
Leave a comment:
-
Got my subframe back from Bambridge on Friday complete with a set of 4 delrin bushes and one solid alluminium bush to look at. Needless to say he's done a top notch job and the bushes look fantastic!!
I'm going to try and get it fitted this week for testing!
Leave a comment:
-
-
For those wondering exactly what bushes we're talking about here, here's the diagram. Obviously as the bushes are unavailable they're not actually shown in the diagram but they are positioned above items 7 and 26a. There are 4 mounting points on the crossmember (2 each side) and there is a bush at each of these points.Attached FilesLeave a comment:
-
Leave a comment:
-
Great news!!!... Kev (bambridge) has been making excellent progress on the bushes after receiving my spare subframe.
I should have a set of bushes for testing within the next couple of weeks. Here are some pics to keep you interested!
Leave a comment:

Don't worry I will continue to update this thread with relevent news but I must say that this is progressing much faster than I imagined it would. I'm looking forward to testing in the next few weeks!! 

Leave a comment: