Announcement

**lind4hl** · 13 July 2009, 15:28

no-one?

**Flat on my back** · 13 July 2009, 18:28

.

I can do un compressed only if that helps?

**mcandmar** · 13 July 2009, 19:07

I have an old shock in the garage too if it helps. Compressed will be hard to measure as the spongy bump stop is part of the shock unit.

**lind4hl** · 13 July 2009, 19:07

i would like to know compressed with bump stop so thats great!!

**bertman** · 13 July 2009, 19:38

Uncompressed is around 500mm
compressed is around 430mm
Bit difficult to measure trying to push down on the damper whilst getting a measurement with a tape measure
Hth

**lind4hl** · 13 July 2009, 19:42

Awesome, thank you very much! can you meausure the width of both ends at the bushing? if you get what i mean..

**bertman** · 13 July 2009, 19:43

ok just a sec

**bertman** · 13 July 2009, 19:52

The top bushing as you know is metal with rubber centre and is 32mm side to side
The rear is a rubber oter with a metal inner,which is 38mm side to side

**lind4hl** · 13 July 2009, 19:55

Thank you! now i can look for rear shocks!

Announcement

Avant rear shocks meausurements

Avant rear shocks meausurements

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment