Superflex or Powerflex

[LYT4X]

Is there a definitive answer based on forum members experience or wisdom?

I read an old thread about this before posting but there didn't seem to be an answer. I need upgraded bushes for the rally car burt don't want to go down the solid (metal) mount route.

Thoughts / experiences welcomed.

[Jamo]

Superflex are better but you cant get them for cast wishbones.

Powerflex do a complete range

[Rusty]

There's also the delrin option, speak to Bambridge

[Jamo]

Ah yes Delrin, harsh ride but if it's a rally car then they would be perfect. 034 also sell them.

[Mr.Crossfire]

How are the superflexes better? I have both, powerflex in the wishbones and superflex in the subframes. Seem about identical to me, considering material and design.

[Jamo]

Superflex dont squeak, fit the wishbones better and were a better quality material, Not seen the latest powerflex versions which have been redesigned several times

[bambridge]

There's also the delrin option, speak to Bambridge

Have considered doing sum Delrin one,s, same as the urs4/6 ones i do, i think volcanors has made some for his

[irishs2]

Superflex dont squeak, fit the wishbones better and were a better quality material, Not seen the latest powerflex versions which have been redesigned several times

Does that mean the Powerflex ones did squeak?

[GazzaG60]

i got mine from vagparts.

think powerflex, the newer design and the dont squeak at all. ive had bugpack in my old scirocco many moons ago and they sounded like i had an infestation.

[Mr.Crossfire]

Mine powerflexes do not practically squeak at all. Maybe that's the "new" design? Also fitment to the cast wishbones was also very snug.

[urS6Tom]

Are there any aftermarket bushes available for the urS4/S6? I just checked both powerflex and superflex sites but they don't seem to make them for the C4 chassis

[Smith_S2]

The Powerflex bushing don't squeak at all, Had them in the S2 and not a peep from them. Make use you use lots of grease/copper coat when replacing old rubber bushing.

John(LYT4X) in have a set of front powerflex bushings for pressed wishbones, £40, i'll drop em off if you want, always a good excuse to take the RS2 for a run!

[bambridge]

Are there any aftermarket bushes available for the urS4/S6? I just checked both powerflex and superflex sites but they don't seem to make them for the C4 chassis

I have done sum for the rear sub-frame out of delrin,