Bolts for wishbone?

[Condor]

Hi All, I have to replace a rear wishbone (which I already have) on my 3b for looming M.O.T I'm not sure what bolts/nuts/washers I need to do this? also where's the best place to get them as I live in the country I can't just pop around to motor factors, can I get em from e bay or somewhere like this?
Thanks
Best wishes Condor.////

[Jamo]

Ebay? no chance

Speak to S2avant, order the bolts, again a collection of the parts via parcel2go and have them delivered to yourself.

You can also try Pete Reeve at quattro corner.

[johne]

You can use standard M10 bolts, nylocks and washers which you can get from the likes of Screwfix.

I suggest the use of a star washer at each end to help stop the bolt moving in the subframe.

John

[Kieron20V]

Just make sure that they are plain shanked bolts and not threaded all the way down. And the factory ones are 12.9 grade.

[Rusty]

Some of the factory bolts are not standard sizes, make sure that you find out the size first. The wishbone bolts are a little different from stock bolts, for the matter of a couple of £, get the correct ones IMO, not worth messing about on a 2 ton, 150mph car.