front sway bar issues, URS4

[simurs4]

Hey guys just finished changing the springs/shocks on my urs4, started putting the front strut assembly back in, everything goes in pretty sweet but i can't get the friggen sway bar ends to go through the holes in the control arm properly so i can bolt it up, iv attached a photo. ive tried putting it in first before everythng else without luck and tried loosening the bar mounts on the subframe but still can't get enough movement in it to go through. am i doing something wrong here? it wasn't that hard to get out when i was removing the strut, dunno y its being a bitch now.
cheers.

http://imageshack.us/photo/my-images/508/swaybara.jpg

[merlin's S4]

Loosen anti roll bar mounts and use a jack to maneuver into position. It's not easy as you already know!

[UrS4boy]

This thread, and the use of a jack AND a rachet strap, should help you:

http://forums.quattroworld.com/s4s6/msgs/38986.phtml

[simurs4]

thanks for the help guys, managed to get it right without having to loosen the sway bar mount bolts too much. got it all back 2gether so i could check the height, installed some 2B adj strut tops with adj konis front and rear and custom height springs. took afew pics for whoever wants to see, i love the way it sits now, just needs an alingment!
the front struts weren't positioned right in the pics so the wheel was too far back making it look weird, its sitting right now.

[quattrostyle]

looks fat, more pics of the car now the strut sits in the position it should be in?