10v to 5 stud

**caterpillar** · 3 August 2011, 21:36

more info please... what 10 v.... what car??

**djh** · 4 August 2011, 10:53

sorry - 10v coupe quattro type 89 on a G plate

**Rusty** · 4 August 2011, 11:17

Look at RE2500's thread, I think he's done it.

**Error404** · 4 August 2011, 15:36

you just need CQ20v driveshafts IIRC mate

**djh** · 4 August 2011, 16:09

Originally posted by Rusty

Look at RE2500's thread, I think he's done it.

I've had a look but wanted to check so sent him a pm, not sure if he's been online since?

Originally posted by Error404

you just need CQ20v driveshafts IIRC mate

Will they mate up to a 10v box and diff?

If so thats good and easy as I have some spare.

**Error404** · 4 August 2011, 17:05

I'm sure front inner CVs are 100mm like the 20v, and most of the rear ones are 100mm also... but I know there was a 90mm rear inner CV used but i've never seen one, maybe that was the really early cars, circa 1988 that we never got over here?

**djh** · 4 August 2011, 17:09

Interesting to know, I'll have a look when I get a chance, i've got all the driveshafts spare so its just a case of bolting stuff on, upgrade the brakes at the same time and hubs

**poor-boy** · 4 August 2011, 19:30

I have just changed them on my B2 (rear only at the moment) and the 20V drive shafts do not fit the 10V Diff or gearbox and vice versa.

**djh** · 4 August 2011, 19:31

Originally posted by poor-boy

I have just changed them on my B2 (rear only at the moment) and the 20V drive shafts do not fit the 10V Diff or gearbox and vice versa.

The early stuff like you've got on yours is different to the later type 89 stuff unfortunately.

**poor-boy** · 4 August 2011, 19:34

Ahhh, no problems. Cheers for clearing that up, I never tried it with a typ89 (do have one though lol).. Well at least you wont have to go changing complete subframes etc then lol..

**djh** · 4 August 2011, 19:40

Originally posted by poor-boy

Ahhh, no problems. Cheers for clearing that up, I never tried it with a typ89 (do have one though lol).. Well at least you wont have to go changing complete subframes etc then lol..

s2 stuff on a type 81/85

http://www.s2forum.com/forum/showthread.php?t=18682&page=4

**poor-boy** · 4 August 2011, 19:41

Originally posted by djh

s2 stuff on a type 81/85

http://www.s2forum.com/forum/showthr...t=18682&page=4

10v to 5 stud

10v to 5 stud

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment