same sufbrames as a 20v coupe quattro?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom_
    S2Forum Extremist
    • Oct 2007
    • 1301
    • Country: Czech Republic

    #1

    same sufbrames as a 20v coupe quattro?

    I must change my subframes,they looks so rusty and i think,that after sandblasting,its gonna be fragile,because of loss weight and material . So do you know wich subframes are same as a cq20v ? I cant find in our country,so i am fiding different options,wihout customazing subframes

    here some pics


    Audi Coupe Quattro 2.3 20V
  • 90quattrocoupe
    S2Forum Maniac
    • Nov 2003
    • 771
    • Country: United States

    #2
    I am assuming the car you have is a 3b, as I see no rear sway. So I am assuming this picture is of the rear subframe.

    All model 89 coupeQ, and B3Q should have the same rear subframe. You should try to get a later one, as it will have the rear subframe mounts locations on the rear subframe.

    After looking at your rust, thank heavens, I am in California.

    I just pulled the subframe from a late B3 in the JY, and no rust.
    Greg W.
    They can have my car when they pry my cold dead fingers from the steering wheel.

    Comment

    • Tom_
      S2Forum Extremist
      • Oct 2007
      • 1301
      • Country: Czech Republic

      #3
      but you dont have a snow for a 4 months and there are salting the roads.I dont have a 3B .
      so all B3q and 89cq have the same subframe,havent it?
      Audi Coupe Quattro 2.3 20V

      Comment

      • Nik0las
        S2Forum Extremist
        • Mar 2009
        • 1345
        • Country: Bulgaria

        #4
        Subframes are the same...

        Comment

        • Tom_
          S2Forum Extremist
          • Oct 2007
          • 1301
          • Country: Czech Republic

          #5
          every engine in quattro and models are same ,right?
          Audi Coupe Quattro 2.3 20V

          Comment

          • Nik0las
            S2Forum Extremist
            • Mar 2009
            • 1345
            • Country: Bulgaria

            #6
            you ask about subframes right so please don't try to be funny....

            only difference is antirollbar mounts, if it doesn't have them you can customize it, if you know what you are doing...

            even more b3 80/90 quattro heve same subframe.

            Comment

            • Tom_
              S2Forum Extremist
              • Oct 2007
              • 1301
              • Country: Czech Republic

              #7
              but i thought (engine,model) that ,with connection of subframes.
              Audi Coupe Quattro 2.3 20V

              Comment

              • 90quattrocoupe
                S2Forum Maniac
                • Nov 2003
                • 771
                • Country: United States

                #8
                Only the front subframes are different. The ABY uses a subframe that has a different mounting location for the transmission, as it is a 01e 6 speed. The B4Q V6 uses the same front subframe as the ABY.

                Except for the late sway bar mount locations, the rear subframe on the Qs are the same for Coupes and B3s.

                Greg W.
                They can have my car when they pry my cold dead fingers from the steering wheel.

                Comment

                • JariP
                  S2Forum Enthusiast
                  • Jul 2003
                  • 192
                  • Country: Finland

                  #9
                  All the V6 front subframes are not the same as ABY. Transmission mounting locations are the same, but there are other differences.

                  Comment

                  • Tom_
                    S2Forum Extremist
                    • Oct 2007
                    • 1301
                    • Country: Czech Republic

                    #10
                    i hasitate if i sandblasted my subframes or not,because they look rusty and i am not convinced if all the rust blows out.I cant find another subframes for sale in our country yet.
                    Last edited by Tom_; 23 February 2012, 12:50.
                    Audi Coupe Quattro 2.3 20V

                    Comment

                    • 90quattrocoupe
                      S2Forum Maniac
                      • Nov 2003
                      • 771
                      • Country: United States

                      #11
                      Originally posted by JariP
                      All the V6 front subframes are not the same as ABY. Transmission mounting locations are the same, but there are other differences.
                      ABY front subframe on a coupe. 8A0-199-313BC
                      B4Q, front subframe, N model and later. 8A0-199-313BC

                      Greg W.
                      They can have my car when they pry my cold dead fingers from the steering wheel.

                      Comment

                      Working...