Urq subframe poly bushings??

[Gonza]

Hi...
I'm considering to put some poly busings on my urquattro '91 RR.
But can't seem to find any for the subframe. Any one here know where to get it? Been looking at powerflex and other webshops whitout any luck.

And what about the size different on the front anti roll bar..??
24 vs 25mm - Front anti roll bar mount
21 vs 23,5mm - Front anti roll bar mount
12 vs 16mm - Front outer roll bar mount

http://www.powerflex.co.uk/products/Coupe+Quattro+%281985-1996%29+Quattro+%281980-1991%29+Quattro+Sport+%281984-1985%29%3CBr%3E80+-+90+Avant+Quattro+%281983-1996%29+S2+Coupe+B3+%281991-1996%29-202/1.html

Hope some one can be help clear this
Best regards Kasper

[Jamo]

Try Superflex either direct or via Quattro Corner

[Gonza]

Allready tried Superflex webshop... They had almost nothing to choose from at all... Maybe I'll take connact by mail.

[steverrquattro]

I'd use the solid aluminium ones supplied by Bambridge.

I've had them on a couple of cars (RR's) and they are what I would consider to be a good upgrade.

[URquattroGus]

There are some year brakes on a PDF on the website for the bushes I believe.

The only sure fire way is to have a look and measure.

The alloy ones seem to be the most popular, but I think there was at least onepost by someone here who had taken some off because they had corroded quite dangerously (no idea who made those bushes)

[Gonza]

I'm worried that the alloy may give me a hard ride. So I'd like poly.... If it exist.. But can't find any on the web

Bonus information: My car is already fitted with Koni and H&R springs...