KW V3 in CQ20V

[Nuno Cristiano]

Hello,

Anyone have feedback of suspension KW V3 in Coupe Quattro 89Q?

To daily drive, street, track day.. i bit of all.

[Nuno Cristiano]

Nothing?

[Jim_Coupe]

Go for it.. They are very nice made and work greate for track use.. according to my own experience!

[Nuno Cristiano]

Go for it.. They are very nice made and work greate for track use.. according to my own experience!

I hope so. I've made the purchase of the same I'm just waiting for them.

I will use the KW V3 + 26mm RARB and PowerFlex kit. I hope to stay with a minimally solid chassis.

[Mr.Crossfire]

26mm rarb was a little too much imo in 90q with kw v3. Of course, it depends on the settings, ride height, tire pressures etc. Anyway, in my car the rear end felt too loose under hard braking, or if I accidentally lifted the throttle during fast corner. On the other hand you should not lift in a corner to begin with. Anyway, I swapped to whiteline rarb. Lost 3kg weight and gained adjustability. Have been running it in the softest setting ever since.