I haven't fitted the subframe to the car yet, first of all noticed the wishbone has a more of a curve on one side than, so swapped them round...
But looking at my standard car, say the wishbone would be horizontal with a moderate drop 50-60mm ish, it looks as if there would be very minimal before the wishbone is stopped by the subframe? See the black bit where the paint has chipped off....
But looking at my standard car, say the wishbone would be horizontal with a moderate drop 50-60mm ish, it looks as if there would be very minimal before the wishbone is stopped by the subframe? See the black bit where the paint has chipped off....
Comment