S2 Coupe lowering

[Tonks4x4]

Or you can go coilover from Bambridge

[Rusty]

Edit:- beaten to it by Tonks!

If you want to keep stock ish spring rates but lower the car a little then there's also the option of some DIY coilovers but you need to do your research on spring rate and length to get that one right...

[irishs2]

Thanks for that Irish. Will give that a try. Assuming the springs will fit standard strut housings??

Yep, they fit the standard strut.

[Colesy]

I lowered mine last year, got sick of pot holes and speed bumps and put standard springs straight back on with Bilstiens

Ditto! Stock height is low enough on the roads around here...

[irishs2]

You could by two front sets, like an avant set and a pair for fronts, as some setups had fronts on the rear of the coupe. 29939VA = 29909VA

so you would have 29909VA on the front struts and 29939VA on the rear struts.

There is quite a few discussions on fronts springs on rears in the forum.

[@ndy]

Any pictures Andy of your saloon??

Also where did you get yours from. Worth a look at cost

Got the Kit from AwesomeGTi.

[A80Avant]

Edit:- beaten to it by Tonks!

If you want to keep stock ish spring rates but lower the car a little then there's also the option of some DIY coilovers but you need to do your research on spring rate and length to get that one right...

Very soon we will have valid info for spring rates. I have tried so many I know!

sent with Nokia 5110

[Error404]

easy. 60n front, 70n rear. done.

[madpugger]

Just cut them dude. do it....

I'm gonna KW V3 mine sometime, whatever you do don't put Bilsteins on, FURKING hell they are harsh. H&Rs with Konis. Keep the standard struts for winter with some 285/80/16 Mud Terrains