What else.

[Donsider]

Hi,

Replacing the following next month.

Refurbished front / rear subframes c/w OEM bushes
New front / rear struts c/w Bilstein inserts and OEM springs
Boost / Water hoses
Front / rear wheel bearings

Any other bushes / mounts advisable while this work is being undertaken.

Cheers, Mike.

[Drummer87]

Roll bar bushes or uprated roll bars
Rear tie rod ends
Drop links
Ball joints
Wishbone bushes
Diff mounts
Gearbox mount

Name a few all depends on how yours are looking. If your changing wheel bearings then change the ball joints if they ain't new already

[andy10v]

Also

Strut top mounts (replace)
track rod ends
Check/replace inner steering arm bushes
check/replace inner rear tie rod bushes (bambridge uprated?)
Bambridge 17mm hex track rod adjusters (replace the probably seized 14mm ones)
check/replace engine mounts
check/replace centre prop support bearing
check diff/gearbox seals (no oil leaks), check the fill plug first if you are going to change the fluid)

If you are doing the boost and water hoses I would check/sort the crank case breather setup/valves.
Check/replace all vacuum hoses

Check CV boots

Get a bag of new bolts/nuts so you can just abuse everything off if needed, a lot of them are stretch stuff anyway.

Bit of an endless list