removing the rear bearings on audi a6 quattro.

[K7ERG]

What's involved removing the hub?

Any pointers or advice welcome

[spink]

Just undo the bolts really.

On refitting, one of the hub to wishbone bolts is best put in before the other as it makes it a lot easier to manipulate it all back together,I can't remember which though lol

Are you not breaking it now then?I want those hp2s

[K7ERG]

Not yet. Going to sort what needs doing for mot. Run it for a few more months and see if there is any other cars that stand out. The hp2s are probably needing new shocks but the calipers are good refurbed less than 2 years ago.

[spink]

ok Craig no worries

[Ryss]

If I am not mistaken your car has cast iron rear hubs. Bearings need to be pressed out and in with a hydraulic press. To get the hubs off is the problem due to ceased ball joints etc.

Best done by the experts who have the tools required.

[UrS4boy]

What's involved removing the hub?
Any pointers or advice welcome

Semi-normal but be aware (the world needs more "wares") , that there are two circlips that hold the bearing in (besides friction). Different than the front wheel bearing.