Just got a new front subframe with cast wishbones whilst I'm changing this over what is a good idea to replace?, thinking polybushes all round but how far to go?
-
-
If you haven't powder coated it or anything, think about galvanising it. ARB bushes, subframe mounts and the wishbone bushes. May as well do the lot if its off. -
All you need is solid subframe bushes to go with that bud!
'93 S2 Avant breaking
'95 S6 Avant sold
'83 80 Quattro SWB
'85 90 Quattro
'85 200 Quattro 10V soldComment
-
Some I prepared earlier.
Very nice
Why do my photos never upload properly on this forum?
Last edited by Pembo; 7 May 2014, 17:01.Comment
-
Your drive is password protected mate, the server can't retrieve them
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
-
Polybushed arb bushes (26mm S2 - 28mm RS2 - Superflex)
Polybushed subframe and wishbone bushes, new ARB brackets and RS2 drop links.
What about gearbox mounts while you're there?
1996 S2 ABY SilverComment
-
I had a nightmare with this now I put em on face book first then copy n paste from there or Photo bucket seems to work even if it's a mess aboutSome I prepared earlier.
Very nice
Why do my photos never upload properly on this forum?Comment
-
Engine mounts if the sub frame is down. No better time. You might be surprised the difference it makes if your old ones are worn....The Perfectionist
sigpic
Audi Class Concours winner Stoner Park 2014, ADI Concours D'Elegance Class Winner 2008, Runner up 2014. Winner, S2Forum Show'n'Shine Billing 2006 & 2008.
Comment
-
Comment
-
Right guys my S2 is in Autobahn getting fully checked over before it hits the Autobahns and they've told me the subframes need changing. The good thing is I have both sub frames and am getting the guys to put original bushes on all round now reading this thread so far ill be getting the engine mounts and gearbox diff mounts replaced am I missing anything? Thanks
Comment
-
Don't forget there is 3 rear diff mount bushesComment
Comment