offset subframe bush

[here2learn]

will i need to use different gearbox mounts with this as the engine and gearbox are fixed and the sub frame shifts is there enough give in the bushes for this 3mm or so offset and to offer up with axel stands in a single car garage

being the imaginative soul i am, i thought of using these to shift the drive train back and compensate with top mount adjusters to shift some weight ever so slightly am still unsure if this idea is laughable or worth exploring.

[Rusty]

I have some in the glovebox, ready to fit.

It won't move the gearbox / engine unless you move the engine on it's mounts.

Stock mounts took up the difference when I removed the gearbox spacer... just.

The main reason to use offset bushes is to gain more castor.

[Rusty]

These are now fitted, check out my Projekt Kastor thread.