LowTec Suspension Kit for CQ

[Seb20V]

Hi,

I am looking for a suspension kit for this Coupe (It's a Quattro 20V ABT). I need something to lower it more or less 40 mm, but which is not too harsh, with ~400 €(600 max)


I found this kit which seems nice, I read some good opinions about this brand but more for E30 etc

https://www.n2o-tuning.com/lowtec-premium-sportfahrwerk-audi-80-coupe-quattro-89q-bj-10.86-08.91/a-1381781/

Has someone ever tried them ?

What would you recommend me to do, knowing that I need to change the whole suspension system ?

Thanks for your answers

[Seb20V]

Nobody ever heard of this brand ?

[Rubberdubber]

Unfortunate name maybe doesn't help, colour is good, Bilstein esque. I know that's not really much help but someone who knows more will maybe come along, always better if they think there's a conversation going on

[Seb20V]

thanks man, but it seems that no one knows about them

[_ShurikeN]

'80 Coupe quattro 4-zyl' - a strange specification of a car, has never been produced from factory.
Max axle load: 950/950. In coupe s2 3B supplementary manual there are figures of max loads 1035/950.

I just suspect, those springs may be good for 4-zyl typ89 quattro saloon, but not for a 5-pot car.
But that is only from theory, and real feedback from users would be more helpful for sure.

[Error404]

I've never heard of this brand before. I have to say alarm bells are ringing in terms of quality, you can't produce good parts that cheap.
KW V1 are considered cheap coilovers and they are 3 x the price. You get what you pay for. So personally I'd save up and buy KW. Just my 2c

[GazzaG60]

4 pot and 5 pot springs look the same and are same dimensions. maybe different rates though.

[_ShurikeN]

The brand itself is known more or less at last at ours. My friend says it is considered as reasonable among our BMW enthusiasts.

[Seb20V]

Thanks guys !

LowTec seems not to be too bad , but as you said , you get what you pay for

We finally decided to take something with which i'm sure to have a good quality : Kayaba Excel-G shocks and H&R springs (-25/-30mm) (or perhaps Cobra)

Time will tell if they do their job properly