Intrax?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Audi imsa racing
    S2Forum Addict
    • May 2007
    • 421
    • Country: Norway

    #1

    Intrax?

    Is there anybody here who has experience with the company and products?

    If in doubt, Flat out.
  • jade
    S2Forum Extremist
    • Jan 2005
    • 1811
    • Home: New Zealand Current: Spain

    #2
    Originally posted by Audi imsa racing
    Is there anybody here who has experience with the company and products?

    http://en.intraxracing.nl/merken/aud...o/aud5551-1k2/
    They look nice
    RS 2 580HP

    Comment

    • terrybullwon
      S2Forum Zealot
      • Mar 2006
      • 8782
      • Country: England

      #3
      The welds on one of those arms look poor and its best practice to use the helper that the bottom of the compression. There race stuff looks good though to be fair
      Last edited by terrybullwon; 21 July 2015, 11:02.
      Chef

      Comment

      • Audi imsa racing
        S2Forum Addict
        • May 2007
        • 421
        • Country: Norway

        #4
        Originally posted by terrybullwon
        The welds on one of those arms look poor and its best practice to use the helper that the bottom of the compression. There race stuff looks good though to be fair
        So you would rather go for the 4 way coilover then the 1K2?

        What kind of coilover do you use on your s2?
        If in doubt, Flat out.

        Comment

        • terrybullwon
          S2Forum Zealot
          • Mar 2006
          • 8782
          • Country: England

          #5
          Originally posted by Audi imsa racing
          So you would rather go for the 4 way coilover then the 1K2?

          What kind of coilover do you use on your s2?
          Depends what you want from your dampers.

          I have a 3 way Ohlins / AST hybrid. Took along time to get them spot on. Do they even specify the valving to the 4 way?
          Chef

          Comment

          • Audi imsa racing
            S2Forum Addict
            • May 2007
            • 421
            • Country: Norway

            #6
            Originally posted by terrybullwon
            Depends what you want from your dampers.

            I have a 3 way Ohlins / AST hybrid. Took along time to get them spot on. Do they even specify the valving to the 4 way?
            I am looking for same dampers that are good and gives me some options on adjustments. The car will be used in time attack and hillclimbs on asphalt.

            Dont know about the valving, but in the mails i have gotten from them. They wanted to know what the car was going to used for, power, weight and all the other changes to the car, so they could build the dampers to match the car.

            How much did you pay for your dampers?
            If in doubt, Flat out.

            Comment

            • aRtiS
              S2Forum Maniac
              • Nov 2008
              • 989
              • Country: Latvia

              #7
              I ordered 4-WEG XL (52mm) from intrax front shocks for my dragster: Black Titan, Anti Roll Control, low-speed, high-speed compression control, thermostat installed, chamber plate.
              Actually the best available option.

              Received, but not installed yet in roll cage



              Sure quality product. Two kind of springs included in the set. Various adjustments,

              Feedback can be known later

              PS: also it was required to have all info about car: wheels, tires, weight, brake calipers, power etc.
              Audi RS2 600 hp
              Audi S2 1200 hp
              MB 230E '83
              https://www.facebook.com/ventracing.lv/

              Comment

              • terrybullwon
                S2Forum Zealot
                • Mar 2006
                • 8782
                • Country: England

                #8
                Nice they built them with no dead stroke as well. That's going to help you a lot.

                Peter I'll send you a Pm
                Chef

                Comment

                • G60Rallye
                  S2Forum Extremist
                  • Dec 2006
                  • 1321
                  • Country: United Kingdom

                  #9
                  So what sort of price are the intrax coilovers for the 1k2 and the 4 ways? They looks to be nice bits of kit.

                  Comment

                  • Audi imsa racing
                    S2Forum Addict
                    • May 2007
                    • 421
                    • Country: Norway

                    #10
                    Originally posted by G60Rallye
                    So what sort of price are the intrax coilovers for the 1k2 and the 4 ways? They looks to be nice bits of kit.
                    Send me your email and i will send you the mail i got from intrax.
                    If in doubt, Flat out.

                    Comment

                    • domas
                      S2Forum Addict
                      • Oct 2014
                      • 307
                      • Country: Lithuania

                      #11
                      I have intrax springs in my 200 20v
                      Rear was too low but it may have something to do with shocks as well
                      they do not supply TUV certificate, for those that need that

                      Comment

                      Working...