Impending Rear Subframe Overhaul.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Vorsprung durch Technik
    S2Forum Freak
    • Jun 2007
    • 4754
    • Country: United Kingdom

    #16
    Originally posted by simon20vq
    That price is a joke surely!

    The alternative is £800 from audi as Anthony found out on his S2 coup and as you lot know these rear subframes are nearly all rotten now and good ones just don't surface,i wish it were different but it's not.
    96 URS6 plus speck saloon
    96 URS6 plus speck estate
    94 2.6 80 Avant
    99 2.8 final edition Cabriolet

    Comment

    • John.
      S2Forum Fiend
      • May 2012
      • 2615
      • Country: Scotland

      #17
      Originally posted by Vorsprung durch Technik
      The alternative is £800 from audi as Anthony found out on his S2 coup and as you lot know these rear subframes are nearly all rotten now and good ones just don't surface,i wish it were different but it's not.
      I'll definitely be modding the B2 one as condition is very good.

      Comment

      • Vorsprung durch Technik
        S2Forum Freak
        • Jun 2007
        • 4754
        • Country: United Kingdom

        #18
        Originally posted by John.
        ARB bolts to the lower edge of the subframe underneath where the track control arms bolt on..........basically the same as the front one.
        96 URS6 plus speck saloon
        96 URS6 plus speck estate
        94 2.6 80 Avant
        99 2.8 final edition Cabriolet

        Comment

        • Error404
          Super Moderator
          • Mar 2007
          • 19789
          • Country: United Kingdom

          #19
          I have a rare 22 and 24mm front ARB sat doing nothing that will be nice on the rear - not too hardcore but a big upgrade over none at all.
          I'd also reccommend you upgrade the front to an S2 26mm bar at the same time
          Panthero Coupé quattro 20vt
          Indigo ABY coupé
          Imola B6 S4 Avant

          Comment

          • Vorsprung durch Technik
            S2Forum Freak
            • Jun 2007
            • 4754
            • Country: United Kingdom

            #20
            Originally posted by John.
            I'll definitely be modding the B2 one as condition is very good.
            Nice one me old china!

            96 URS6 plus speck saloon
            96 URS6 plus speck estate
            94 2.6 80 Avant
            99 2.8 final edition Cabriolet

            Comment

            • John.
              S2Forum Fiend
              • May 2012
              • 2615
              • Country: Scotland

              #21
              Originally posted by Error404
              I have a rare 22 and 24mm front ARB sat doing nothing that will be nice on the rear - not too hardcore but a big upgrade over none at all.
              I'd also reccommend you upgrade the front to an S2 26mm bar at the same time
              Feel free to PM me with a price

              Comment

              • andy10v
                S2Forum Zealot
                • Mar 2009
                • 5996
                • Country: Scotland

                #22
                TimE-J cut the brackets off his old subframe to weld to the new one



                Current-2004 Impreza PPP wagon

                Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
                Sold ABY-stock

                Comment

                • John.
                  S2Forum Fiend
                  • May 2012
                  • 2615
                  • Country: Scotland

                  #23
                  Originally posted by andy10v
                  TimE-J cut the brackets off his old subframe to weld to the new one



                  Thanks Andy, will take a read of that thread.

                  Comment

                  Working...