AK Front adjustable top mounts driving Impressions

[jade]

To Anyone.... that has these fitted to a road car, I would be interest in feedback on feel and vibration

Also how you setup the camber and caster

Thanks

[Error404]

Nice quality parts but I couldn't live with them on mine - I found they transmitted a lot of low frequency road noise into the chassis which made driving any kind of distance very wearing. Maybe I'm getting old
Clearly this is an issue with all solid mounts not just AK ones. Personally I found the benefits were not that tangible compared to the negative trade off. My 2c

[jade]

Nice quality parts but I couldn't live with them on mine - I found they transmitted a lot of low frequency road noise into the chassis which made driving any kind of distance very wearing. Maybe I'm getting old
Clearly this is an issue with all solid mounts not just AK ones. Personally I found the benefits were not that tangible compared to the negative trade off. My 2c

Thanks for the feedback, Alex

[Rusty]

Although not the product in question, my own design of top mounts are very similar. I found that on their own, there was almost no change in NVH but when combined with solid subframe bushes, then poly wishbone bushes and finally poly engine mounts, the nvh is on another scale... I quite like it just now but if I was using the car regularly, it'd be a few steps too far

[AndyP]

I have these fitted and was quite suprised by the lack of NVH compared to std top mounts and the extra camber certainly improves the feel of the steering.

[varia]

i have this mount on my car, i really like it. top quality.
i had oem mount before with mance mount saver. this is a bit harsh with the solid sub-frame bushing, but perfect for my car since its not a daily driver
i would buy it again.