Audi 80 steering rack

[ventt]

Hello!

I'm having problems with my power steering.

I've done:
* Engine swap from 2.8 V6 to 2.3 20v
* Replaced the tandem pump with the V6 pump
* New steering rack

So, if I turn my wheels to the left, the pump starts spinning by itself. If I turn wheels to the right, pump is staying still. That means if I tighten the belt, I can only turn wheels to the right. Starting the engine will make the steering rack move by itself, though it hasn't any air inside. Also I don't have any valves inside the banjo bolts.

https://www.youtube.com/watch?v=YFEzpwrhZyU

Exactly like this ^

What should I do?

[Error404]

Sounds like the rotary valve in the rack is damaged and/or the fluid return is blocked.

[afterburner]

You've switched your power steering lines. Connect them the other way around.

[ventt]

Yep, the lines were switched. Took many hours but the steering wheel is now very easy to move.