7A front ARB on rear?

[WabTheKing]

heard soming about this once,

anyone tried it?

regards
will

[porkkis]

It will be way too stiff to perform well.

[Greg_S]

I think doug has done somethings like this

[4WheelDrifter]

Audiman has swapped the rear struts and used the front ARB on the rear. Allegedly.
Apparently it makes the rear break away to easy. Is that a problem? Seemed ok when I had a ride in his car.

[porkkis]

You will have less grip. I might be fun, but not fast.

[puppetman]

i have done this. i took a 20 front sway bar, made links and cut to length. works great. now i need to do the suspension

[WabTheKing]

i have done this. i took a 20 front sway bar, made links and cut to length. works great. now i need to do the suspension

.

how long did you make the drop links?

cheers
will

[Doug_RS2]

I have the front 26mm ARB on the rear of my coupe - the 2wd and quattro are different and only one fits though.

With the RS2 front it is very well balanced - not tail happy like Toms. You can control front to rear slides on the throttle mid corner.

Marco has this as well.

[Doug_RS2]

http://www.s2forum.com/forum/showthread.php?t=404&highlight=rear+arb

HTH

[WabTheKing]

ta very much

[puppetman]

i made the drop links 24mm long. center to center. but i did cut the sway bar to length. I just went autoxing and it worked great. no problems with it yet.