You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Does anyone know if anybody offers a polly bush for the inside of the front track rods on the URS's? I've looked on AK and they dont seem to list anything.
Does anyone know if anybody offers a polly bush for the inside of the front track rods on the URS's? I've looked on AK and they dont seem to list anything.
Thanks for that idea,thats opened up another tweak. Are you now keeping the S6,be good if you were?
Yeah, its Rs2 spec then a bit more, just put a set of AD08R's to try and keep my alive so its going nowhere!!
Re the Bushes, thanks very much, ordered and paid for
Next up is the apikol fmic kit from 034. I know figuring it all out myself will save £££ but i'm so busy that all i can see happen is it staying in a million pieces for the year OR the intake temps with the side mount melting something expensive
The Apikol core is very thick (3.5 inches from memory) and almost certainly won't fit behind the Euro bumper. May be possible by removing AC and lots of messing/cutting/fabricating. The radiator would possibly move back towards the engine a little but you'd probably have to modify or make new mounts. Then the supplied pipes probably won't fit as the intercooler is designed to fit further forwards.
Would be nice to see it done but I've a feeling that you might be the first. 034 Motorsport did used to sell a different FMIC kit to fit behind the Euro front bumper but I can't see this on their site anymore.
Thanks Merlin for the input. I was trying to get a solution that meant the least time as i'm so busy i fear it will be sitting in pieces for longer than i want!
Does anyone possibly have a list of bends/hoses/cooler etc that is fairly known to do the job?
Thanks Merlin for the input. I was trying to get a solution that meant the least time as i'm so busy i fear it will be sitting in pieces for longer than i want!
Does anyone possibly have a list of bends/hoses/cooler etc that is fairly known to do the job?
Can someone outline what is available for C4 S6 for rear frame and suspension - in poly and standard as some companies produce varous parts but there is no complete 'kit' anywhere.
I am to do complete rear axle overhaul and am confused as to what is available for it.
The Apikol core is very thick (3.5 inches from memory) and almost certainly won't fit behind the Euro bumper. May be possible by removing AC and lots of messing/cutting/fabricating. The radiator would possibly move back towards the engine a little but you'd probably have to modify or make new mounts. Then the supplied pipes probably won't fit as the intercooler is designed to fit further forwards.
Would be nice to see it done but I've a feeling that you might be the first. 034 Motorsport did used to sell a different FMIC kit to fit behind the Euro front bumper but I can't see this on their site anymore.
Can someone outline what is available for C4 S6 for rear frame and suspension - in poly and standard as some companies produce varous parts but there is no complete 'kit' anywhere.
I am to do complete rear axle overhaul and am confused as to what is available for it.
The only upgraded track bushings come
from power flex in the c3/v8q section. Not
even Albert makes them. I was trying to
get him to make fluro joint track rods for the
c4 but hasn't done anything regarding that
yet.
@HMS-s6-- The apikol FMIC won't work behind
Euro bumpers without major modification. 034
makes a fmic kit that fits behind euro bumpers.
They took it off their website but I've contacted
them a few months and said they can reproduce
the euro bumper fmic kit no problem. The only
downside to their kit is it can only support up to
400whp but you don't have to hack up the front
of your car.
When 034 had it listed on their website
they said they custom made it for a customer
with a urs6 & euro bumpers. They claim
no modifications needed. Just add the brackets
& bolt on. For more specific details contact Jeremy
or Javad over at 034.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment