Subframe bolts.

[John.]

My CQ has poly bushes between subframe and chassis, I'm looking to replace the bolts as I never did when fitting the subframe.......just used the old ones.(m10 x 80 ish)
So I was looking on line and then checked here.... http://www.s2forum.com/forum/showthread.php?t=26873
.....and now my head's numb!! Is it best to use bolts supplied by power flex or just replace with OE spec?
....then I saw these....... http://www.ebay.co.uk/itm/Genuine-Vo...0AAOSw8oFXzXnd ??

Cheers.

John.

[mac2226]

Use oem bolts

[John.]

Use oem bolts

Couldn't find a part number in the post I linked above......just the torque setting?
Do you know part number?

[andy10v]

5 N 90556902 hexagon bolt F >> 8B-N-015 000 M10X75

(5) N 90580801 hexagon bolt F 8B-P-000 001>> M12X1,50X85

[nribs]

https://store.034motorsport.com/mqb-...s3-tt-tts.html

Pricey

[John.]

5 N 90556902 hexagon bolt F >> 8B-N-015 000 M10X75

Thanks Andy.

https://store.034motorsport.com/mqb-...s3-tt-tts.html
Pricey

[Mikes2]

https://www.vwheritage.com/n90556902-bolt-m10x75-engine-transmission-mounts

Those 034 bolts are stainless steel. Completely not suitable for this application

[John.]

https://www.vwheritage.com/n90556902...mission-mounts

Those 034 bolts are stainless steel. Completely not suitable for this application

The bolts are OE Mike according to the script?.......Thanks for the link, I'll order these I think, price is reasonable I think?

[Mikes2]

The VW Heritage ones are the right ones. A bit pricey but not much option these days. Pretty sure they're nla via Audi dealers / TPS.

You'll need 8 of these for each end so it starts to add up

[John.]

Pretty sure they're nla via Audi dealers / TPS.

That'd sound about right !!

[AndyP]

£4.50 for one bolt

http://www.ebay.co.uk/itm/M10-x-1-5-...HtJeG5nu3tDQFw

[John.]

£4.50 for one bolt

http://www.ebay.co.uk/itm/M10-x-1-5-...HtJeG5nu3tDQFw

Would this type be better?

[Colesy]

I don't know much about bolts but the subframe bolts are supposed to be stretch bolts aren't they? So probably best to stick to ones the right spec.

[Mikes2]

In the fitting application for the subframe 35 Nm + 90 degrees is not going to stretch an M10 8.8 bolt

[AndyP]

OEM bolts are 10.9 as in the link I posted, I'm sure this is the seller I got mine from