Alloy Flywheel Q

[mcandmar]

I would replace all the bolts, there so cheap it would be silly not to. There is also a small bearing in the middle of the flywheel, worth replacing too while you can get at it.

The clutch release bearing is mounted onto the gearbox, as far as i know there are different but not because of the clutch setup. But because of the different gearbox.

With a 5speed box use the 3B bearing, with a 6speed use the ABY is what i was told.

[4WheelDrifter]

I'm kind of doing it all wrong to be honest, converting a 7A with an ABY engine, with 3B flywheel setup, and then converting to a 6speed tranny

Sounds ok to me. I'm looking at doing a real Frankenstein combo with all the bits and pieces I have.

[mcandmar]

Lego for grown ups