Is this an S2 3B flywheel?

[mcandmar]

I think i'm missing a timing pin on the back side of the flywheel, can anybody confirm?

Thanks,

Mark.

[mcandmar]

Front side..

[~Delta]

Looks like either a 3B or 7A item, top picture seems to show the remains of the firing pin...

[mcandmar]

Ok so is the bottom right where the pin should be? Any idea on how long it needs to be?

Cheers,

Mark.

[martinjs]

According to the manual, when the flywheel is fitted you have to fit the firing point sender (G4) to the bell housing, rotate the flywheel so the pin points to the sender the gap should be 0.45-1.25mm between end of pin and the sensor.
HTH

[~Delta]

Aye, bottom right of top picture. Length approx. 10mm, but length isn't really critical, distance of pin to TDC sensor once flywheel is bolted to crank however is.

[mcandmar]

Perfect thanks guys