Auto Trans Faults Codes

[GarCo20]

Hello,
I have a 1993 Audi b4 80 with 2.3e and auto trans. The trans stays in 1st gear and will not shift into a high gear. The VAG-COM scan gives me the following codes:

Address 02: Auto Trans Labels: None
Part No: 097 927 731 CJ
Component: AG4 Getriebe 097 1265
Coding: 00000

2 Faults Found:

34-10 - No Elaboration Available - Intermittent
00652 - Gear Monitoring
27-10 - Implausible Signal - Intermittent

Could somebody please tell me where these components are and what to do with them. Also, if there is anything else I need to know to troubleshoot this my car.

Thanks for your support!

[Dynasty]

Maybe this info can help you: http://wiki.ross-tech.com/wiki/index.php/00652 Personally i would have checked the Multi-Function Switch (F125?) first (located on the gearbox).

[GarCo20]

Thank you for your prompt reply I really appreciate it. Also, I wonder is you know the part number of the multi-function switch?
Thanks for your help,

[Dynasty]

Take a look at this site: https://nemiga.com/cat_spares/etka/audi/a80/114/927500/

If your gearbox is a AAZ, then it is part number 13 in the link above.

[ChrisAudi80]

Did you check if the trans has enough oil?

[GarCo20]

Thank you very much for the information Dynasty.

[GarCo20]

The oil Level is good. Also, I changed the oil and filter. Thanks for the support!

[GarCo20]

Dynasty,
I ordered the multi-function switch. My transmission have the part number: 095919823B. Once I received the part, I will let you know if it fixes my issue. Thanks for your support!
GC

[GarCo20]

Dynasty,
My automatic transmission went bad; So decided to replace with a manual transmission. Thanks for your help!

[popdemonic]

from my experience once the gear monitoring fault shown,most of the time your gearbox needs overhaul soon.