Flywheel conversion

[QuattroFever]

Hi guys,

I am puting an 034 lw flywheel on but I'm having trouble getting hold of a couple of parts.

I need the circlips for securing the needle bearing into the 7A flywheel and the flywheel bolts also 7A.

I'm itching to get my car back together.

Has anyone got spares of these knocking about just by chance

[QuattroFever]

Even any used circlips off a 2.3 20v?

I'll donate my left nut!!!

[QuattroFever]

Had this conversion finished for a while now but I find that I'm suffering worse crunched shifts from first to second than before and a horrible rattling when it's hot.

I have an aby with 034 release bearing, 034 7A alu flywheel, ABY master cylinder and ABY slave cylinder. clutchnet 3B clutch. fully pressure bled and adjusted out to the max

Should I be using 3b master and slave?? seems like the clutch won't disengage properly. crunches into reverse at idle and 1st into second at high rpm.