Which flywheel for URS4?

[jaychen]

Hi all,

I have a Southbend KF771-SS-DXD-B clutch designed for use with 7A flywheels.

The car is a 5 speed 01E 93 URS4.

Is this flywheel suitable to use with this clutch:

http://ttvracing.com/product/audi-80-200-20v-3b/?referrer=product-listing&iframe=true&width=80%&height=100%&type=flywheels&engine=audi-s2-3b&manufacturer=audi

States that it also fits URS4 and is designed for a 7A clutch.

Just want to make sure before I pull the trigger!

Thanks

[Morris400]

The rule of thumb when planning a clutch and flywheel combo for 01E UrS4 Is to make sure you pair AAN clutch to AAN FW, or 7A clutch to 7A FW.

im going to be using a SB KF 771 stage 2 PP and stage 4 disc designed for 7A with an 034 LWFW for 7A.

The 7A FW is thiner then the URS dual mass FW, and the 7A PP is thicker then the URS PP.

Using an AAN clutch kit with AAN PP will not have the correct clearance for the slave to perform properly. It will work but it will only work for a while until their are issues.