Announcement

Collapse
No announcement yet.

New CV joint source

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New CV joint source

    Hi guys,

    Where is the best place to source good quality inner and outer CV joints for a 3B S2?

    Cheers chaps

  • #2
    SKF on their own website. Guaranteed not fake.
    https://www.vsm.skf.com/int/en
    Nothelle S2 Avant
    Black Ur project
    Ocianic Ur project gone
    S2 Coupe project gone
    Urs6 plus project gone

    Comment


    • #3
      Originally posted by Tractor Dave View Post
      SKF on their own website. Guaranteed not fake.
      https://www.vsm.skf.com/int/en
      That was quick Dave, I'm impressed!! Thanks fella.

      Comment


      • #4
        I used them for mine and the prices are ok and they are quick.
        Don't Chuck your old ones. If they aren't too worn they can be cleaned, 're greased and new boots. The original ones seem to be very well made.
        Nothelle S2 Avant
        Black Ur project
        Ocianic Ur project gone
        S2 Coupe project gone
        Urs6 plus project gone

        Comment


        • #5
          I've been experiencing a vibration between 30-40 mph which was doing my head in so removed a rear passenger drive shaft today. The inner CV was very notchy even although the grease was still in reasonable condition. I stripped, cleaned and regreased it but the joint is very tight now, much worse that it was before. I'll need to have another look at it tomorrow but it's doesn't feel good. Messy bloody job eh!!!

          Comment


          • #6
            SKF only list front inner and outer for a 3B. Are the rears the same as the fronts?

            Comment


            • #7
              Spidan 22748 for coupe rear outer, inners are the same all round

              Comment


              • #8
                Originally posted by Colesy View Post
                Spidan 22748 for coupe rear outer, inners are the same all round
                Nice one, cheers Colsey.

                Comment


                • #9
                  Originally posted by gmac78 View Post
                  I've been experiencing a vibration between 30-40 mph which was doing my head in so removed a rear passenger drive shaft today. The inner CV was very notchy even although the grease was still in reasonable condition. I stripped, cleaned and regreased it but the joint is very tight now, much worse that it was before. I'll need to have another look at it tomorrow but it's doesn't feel good. Messy bloody job eh!!!
                  Sounds like it's dead then
                  Nothelle S2 Avant
                  Black Ur project
                  Ocianic Ur project gone
                  S2 Coupe project gone
                  Urs6 plus project gone

                  Comment

                  Working...
                  X