Slaking on Throttle off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Billman
    S2Forum Freak
    • Nov 2004
    • 4129

    #1

    Slaking on Throttle off

    Hi, when i am i.e. in 3 gear and let the Throttle then i feel a slaking. What can it be? If i need a part, can you please give a partnumber. Car is RS2.

    Greetings
    Go Holset or Go RS4
  • Billman
    S2Forum Freak
    • Nov 2004
    • 4129

    #2
    ???
    Go Holset or Go RS4

    Comment

    • s2driveruk
      Super Moderator
      • Jul 2003
      • 12696
      • Country: England

      #3
      do u mean slack in the drivetrain when lifting off the throttle? Does it only happen in 3rd or all gears? Sounds like one or all of the following:
      Gearbox mounts
      Snub mount
      Read diff mounts
      Prop centre bearing

      If you replace the rubber mounts it should tighten everything up nicely reducing the driveline shunt/lash that you get on taking up drive and also when you lift off quickly

      Cheers
      David
      sigpic

      1992 3b S2 Coupe

      Comment

      • Billman
        S2Forum Freak
        • Nov 2004
        • 4129

        #4
        On all gears when taking off throttle quick.

        What is the part number for the mount of the gearbox?

        thanks
        Go Holset or Go RS4

        Comment

        • Jay
          S2Forum Maniac
          • Jul 2004
          • 599

          #5
          Try Aelred or Corey, they both do uprated ones... I used the ones Aelred sells, good price and made a massive difference to the drive line...

          Jay

          Comment

          • Dan_s2_coupe
            S2Forum Addict
            • Aug 2006
            • 482
            • Country: United Kingdom

            #6
            I had this problem and i asked tom bout it this is wot he suggested to me it isnt completely cured but it helped

            Where the snub mount is there is a adjustable bracket with 2x 17mm i think if u loosen then and push down hard on the bracket and tighten

            Comment

            • Eriksson
              S2Forum Addict
              • Jul 2004
              • 329
              • Country: Sweden

              #7
              me too

              I have changed SPQ snubmount
              engine mounts
              gearbox mounts
              diff mounts and powerflex rear diff bush
              new prop bearing.


              Still i have a slack off..
              most noticeble on 1 and 2 gear
              sigpic
              Audi S2 Coupe - 92
              Koni + H&R. PowerFlex bushes. 3" Exhaust
              RS2 IC. RS2 TURBO. RS2 EX MAINFOLD
              Best ET 2006 13.8 @ 157 Km/h (Stock turbo and EX mainfold)
              Best ET 2007 12.78 402m, 0-62mph: 4.2 sec, Speed: 175 km/h (GTEC)(1.1bar)
              Best ET 2007 201m 8.15@140km/h
              Best ET 2008 402m 12.34@177km/h
              My Project
              http://www.s2forum.com/forum/showthread.php?t=16997

              Comment

              • Billman
                S2Forum Freak
                • Nov 2004
                • 4129

                #8
                Originally posted by Dan_s2_coupe
                I had this problem and i asked tom bout it this is wot he suggested to me it isnt completely cured but it helped

                Where the snub mount is there is a adjustable bracket with 2x 17mm i think if u loosen then and push down hard on the bracket and tighten
                Where is this snub mount?
                Go Holset or Go RS4

                Comment

                • prosty
                  S2Forum Extremist
                  • Jun 2005
                  • 1114
                  • Country: Sweden

                  #9
                  I have new *.* still having a bit of slack off, but then I release the throttle only on 7499 rpm all the time
                  2004 9-5 aero
                  2009 Subaru Legacy Diesel
                  1994 Toyota Supra Eurospec 6-spd LHD
                  3-4 Audis in parts

                  Comment

                  • Billman
                    S2Forum Freak
                    • Nov 2004
                    • 4129

                    #10
                    I have another small question. The suspension strut mounts are the same for the front and the Back on the RS2? What is in the back?
                    Go Holset or Go RS4

                    Comment

                    • Dan_s2_coupe
                      S2Forum Addict
                      • Aug 2006
                      • 482
                      • Country: United Kingdom

                      #11
                      the snub mount is on the front of the engine above the aircon pump

                      Basicly u need 2 take the aux rad out the way if u have 1 then u can just get on the 2 17mms

                      Comment

                      Working...