Diff Lock!

[20vQC]

PAUL!!! Bro... I have a question... yes, another one hehehe So... I was looking underneath the car, and on the rear diff... I saw 2 vacuum lines ( both were black but one has a blue stripe and the other one has a yellow stripe), at the back of the diff the is one conector with 2 wires... What should I do to eliminate the diff speed lock off????? thanks a lot!!!

[Acidburn]

IIRC its cutting the blue and white wire to do this, think jeffer has more information about it as its how he does his donuts.

[urquattro-island]

you

should cut the blue and white wire under the rear seat. Nothing to do under the car mate..

[QuattroFever]

is that safe to do, is there any damage done by driving round with the diff lock on other than no ABS!! .

I don't know how it locks the diff but im guessing it must be a vacuum drawn bolt of some kind if it is how thick is the bolt or have I got it all **** from elbow??? :roflmao:

[mcandmar]

is that safe to do, is there any damage done by driving round with the diff lock on other than no ABS!! .

I don't know how it locks the diff but im guessing it must be a vacuum drawn bolt of some kind if it is how thick is the bolt or have I got it all **** from elbow??? :roflmao:

Not too sure but have a look here http://www.s2forum.com/forum/showthread.php?t=8425 you can see the splines on the stock diff. AFAIK it works by locking that drive shaft to the body of the diff unit.

[20vQC]

I'll take a look for that wire... will make an extension to a switch and then... nothing happend here! hehehe BTW I was reading those old posts and couldn't find anything about our differentials... otherwise I like the idea to swap a rear torsen diff from an V8! My problem is to find a V8 :S