ok... I'm stucked again with engine and tranny ANYBODY HEEEEELP!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 20vQC
    S2Forum Maniac
    • Aug 2007
    • 684
    • Current: Italy

    #1

    ok... I'm stucked again with engine and tranny ANYBODY HEEEEELP!

    guys...as you know I'm doing the AAN transplant to my Coupe Quattro. I have a 01E 6speed transmission from a 93' UrS4. OK, here I come again...

    My stock 01A tranny has an electronic speed sender to the cluster. The 01E (S4's one) has the cable sender or mechanic sender. Could I change the diff plates and put the stock plate with the electronic sendr to the 01E tranny? Which one of you has done this tranny conversion and how did you resolved it???

    The other thing is tha the lenght of the 01E tranny is the same as the 01A? I mean...is a direct swap with no mods?

    The engine trouble will be posted at the Engine thread! Guys please help me a little... I'm doing this alone :S
    - Looking for a S2
    - Lancia Dedra HF turbo i.e. (4sale)
    - Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )

    sigpic
  • urquattro-island
    S2Forum Extremist
    • Mar 2006
    • 1915
    • Home: Norway Current: Iceland

    #2
    hello

    i actually think the s4 6speed tranny is a little shorter than the 01a tranny.
    japanischer industriabfall nein danke!!
    www.rackeltrim.se Icelandic Division

    Comment

    • 20vQC
      S2Forum Maniac
      • Aug 2007
      • 684
      • Current: Italy

      #3
      shoot...! no idea about the speed sender?
      - Looking for a S2
      - Lancia Dedra HF turbo i.e. (4sale)
      - Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )

      sigpic

      Comment

      • Pirvu Eugen
        S2Forum Extremist
        • Apr 2007
        • 1978
        • Country: Romania

        #4
        Is a special sensor mounted on top off what you have on the trany...
        I have somewhere the pn. for that sensor.
        About the lenght...The 6 speed has same lenght with 5 speed 016. and longer then ARV 5 speed box mounted on 3B engined S2.
        Hope this helps!
        All the best!

        Comment

        • Pirvu Eugen
          S2Forum Extremist
          • Apr 2007
          • 1978
          • Country: Romania

          #5
          You will need an shorter propshaft for the 6 speed....

          Comment

          • caterpillar
            S2Forum Fiend
            • Jun 2004
            • 2480

            #6
            tips

            and 2 pc of right propshafts for the front end( remember the front an rear for vw and audi are 3pc unit.you use some wood and a heavy hammer

            Comment

            • Pirvu Eugen
              S2Forum Extremist
              • Apr 2007
              • 1978
              • Country: Romania

              #7
              Originally posted by caterpillar
              and 2 pc of right propshafts for the front end( remember the front an rear for vw and audi are 3pc unit.you use some wood and a heavy hammer
              Yes!!! You are right! Dont ask me how i know..

              Comment

              • 20vQC
                S2Forum Maniac
                • Aug 2007
                • 684
                • Current: Italy

                #8
                a shorter propellershaft??? hey but... are you talking about the left and right proppelershafts? or the rear one that goes to the diff? guys sorry me but I don't get that...! please explain me that!!!
                - Looking for a S2
                - Lancia Dedra HF turbo i.e. (4sale)
                - Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )

                sigpic

                Comment

                • spink
                  S2Forum Freak
                  • Jul 2003
                  • 4382
                  • Country: England

                  #9
                  yes the one that goes to the diff from the gearbox.

                  Comment

                  • 20vQC
                    S2Forum Maniac
                    • Aug 2007
                    • 684
                    • Current: Italy

                    #10
                    Fu%#! the driveshaft! Well at least the front driveshashaft are the same... Do you know how much do I have to shorten that from the tranny-diff???
                    - Looking for a S2
                    - Lancia Dedra HF turbo i.e. (4sale)
                    - Typ89 Coupè quattro, 20Vt AAN, VEMS, K24-7000@1.3bar (scrapped )

                    sigpic

                    Comment

                    Working...