Which sport clutch to AAN with 7A flywheel

[button]

I must change clutch in my S4. I decided to put a single-mass flywheel. I bought it from 7A engine. Flywheel lose some wight - from 11,2 kilogrammes to 6,3 kilogrammes:


Now I want to buy some "stronger" clutch. I think about SPEC Stage 3+. It's realy so good, like producer praise? I read many contradiction opinions about it. Is there worth is one's price, or maybe a can better spend my money?

[K Simmonds]

It depends on how much power and more importantly torque you want the clutch to deal with. Sash sport clutches are probably worth considering if you're only planning on RS2 power and torque levels. That's what I have in my 300 BHP 3B Coupe, it doesn't feel much different to a standard clutch and seems to have lasted well. It's still holding out after 80 K miles!!

[Acidburn]

Speak to aelred on here about a clutch and he will sort you out a good one.

[terrybullwon]

I done the same as you to my 3B fly wheel, I have a spec clutch with a carbon ceramic friction plate. Looks the nuts.

[button]

It depends on how much power and more importantly torque you want the clutch to deal with.

I don't know what power can satisfy my. I think that "RS2 setup" is minimum power and torque, which I can accept in the future.
I want a sport, stronger clutch because I'm regulary starting in amateur drag-races, and orginal clutch may not hold out to long.

[K Simmonds]

No I don't expect the original clutch will hold out long at all if you are subjecting it to frequent drag racing. I would have thought the spec 3+ would be suitable, you need to talk to someone like 034 or as has already been suggested Alred on here.

[topsparky]

i thought certain people on this forum
had issues with the specs clutch
slipping and specs not honouring their
warranty
can't remember who they we're
try the search button mate

[button]

Hi.
I decide to put into my car a sport, done on the order, clutch (sprzegla.com). I bought a used, 7A pressure plate and clutch disk. What torque can transfere it in series?
Should i put to pressure plate a double spring or maybe suffice a 40% strengthen then standard?