gearbox and diff drainers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • s2robbo
    S2Forum Enthusiast
    • Mar 2008
    • 111
    • Country: United Kingdom

    #1

    gearbox and diff drainers

    hi all .i cant get my drainers undone had the car up on axel stands in all 4 corners and nearly pulled it of the stands . tried air guns too. any one got any ideas. thank you.
  • AndyP
    S2Forum Zealot
    • Feb 2004
    • 6049
    • Country: England

    #2
    Heat and the biggest breaker bar you can get you hands on! And make sure you undo the filler before the drain.
    sigpic
    1991 Audi S2 3B - 2.5 Stroker engine
    1997 A6 2.5TDi quattro avant - C4
    1976 RD250E / 350LC cafe racer

    Comment

    • ifa
      S2Forum Fanatic
      • Apr 2005
      • 57
      • Country: Finland

      #3
      Put socket to the draining plug and hit it with a hammer. Doing this usually helps.

      Using common sense with hitting power is allowed.

      Comment

      • Rusty
        Super Moderator
        • Jun 2004
        • 18953
        • Country: United Kingdom

        #4
        My rear diff plug is stuck solid and I haven't got the guts to get medieval on its behind :mischeif:

        Tried everything but it wouldn't budge and I didn't want to break it
        Cheers'en, AndyC
        1994 ABY Coupe - Projekt Alpinweiss

        Comment

        • s2driveruk
          Super Moderator
          • Jul 2003
          • 12696
          • Country: England

          #5
          freeze spray worked on mine once it siezed up a second time. first time a long time back at Dialynx they ended up welding a wheel bolt onto it to get some decent leverage, eventually it let go and opened up

          just remember to moly slip the drain and fill bolts when you refit them and they should be ok after that.
          sigpic

          1992 3b S2 Coupe

          Comment

          • s2robbo
            S2Forum Enthusiast
            • Mar 2008
            • 111
            • Country: United Kingdom

            #6
            thanks for the reply guys i have some of that freeze spray so when i get it in the air ill give it clean with wire brush and spray. then ill give it some welly .

            Comment

            Working...