another 01E conversion thread

[anton]

i've bought a DSY box for my CQ......yes overkill i know but i have plans
i have a few probs tho....first off my plate that mounts the shift linkage to the gearbox has 3 screw holes, however they dont fit with the mounting holes on the box. although two can fit ok the third is about 1cm above, do i just need to space this one up, or space them all up or grind down the two higher ones?

second issue is with clutches, my bos has nothing atm and my car has the stock 01A master and slave, i know with the dual mass you need both the master and slave from the 6 speed but do you still need it if using a single mass??

Ant

[4WheelDrifter]

For my DSY I made a spacer for the linkage.
I'm also using my original 3B clutch master and slave cylinders with a single mass flywheel. Seems to work so far, although I haven't driven it yet.

[anton]

for the spacer did you justspace out the sinle one on the left hand side??

Ant

[4WheelDrifter]

for the spacer did you justspace out the sinle one on the left hand side??

Ant

That's right. Just space the single LHS one. Bolt up the other two and it's pretty self explanatory.

[anton]

fantastic, cheers mate

Ant